What is ws2812 LED strip? WS2812 LED strip is an intelligent programmable RGB LED strip with built-in driver IC. Each LED lamp bead has a WS2812 control chip integrated inside, and no external driver circuit is required. It uses a three-in-one package: the red (R), green (G), and blue (B) LEDs are integrated with the control chip in a 5050 package (5.0mm × 5.0mm) lamp bead. It uses a single-line communication method, and only one data line (Din) is required to control the entire strip, and data is transmitted through a specific timing signal. It has a cascade function, and each lamp bead automatically forwards the data to the next lamp bead after receiving it, supporting hundreds or thousands of LEDs in series. It can be addressed independently, and the color (24-bit color depth, 16.77 million colors) and brightness of each lamp bead can be controlled individually. Easily achieve complex effects such as rainbow gradient, marquee, breathing light, etc. The voltage is 5V, and each LED is about 60mA when it is fully bright white. The total current needs to be calculated according to the number of LEDs and the appropriate power supply should be selected. Common density: 30/60/74/96/100/144 LEDs per meter. Standard interface: Din (data input), Dout (data output), VCC (power), GND (ground). Compatible with Arduino (FastLED library, NeoPixel library), Raspberry Pi, ESP8266/ESP32, RF, Bluetooth, wifi, music, K-1000C/K-8000C, BC-204/216 and other controllers. It can be widely used in: home decoration (background light, atmosphere light), advertising signs, DIY projects (art installations, wearable devices), stage lighting, etc. Long light strips require multi-point power supply to prevent the end voltage from dropping. Too long data lines may cause signal distortion, and a signal amplifier can be installed. It is recommended to use a soldering iron below 260℃ to avoid high temperature damage to the IC. WS2812led strip has become one of the popular choices for makers and lighting designers due to its ease of use and flexibility.
Product Description:TM1814 RGBW LED strip is a high-performance addressable LED lighting product that combines RGB color with an independent white light channel (W). Through...
Description: SK6812 4020 side LED strip is a programmable colorful light strip with a special packaging design. Its core features are the side-emitting direction...
Description: The Apa102 product is a two-wire transmission 3-channel RGB drive control circuit with a light-emitting circuit LED product. Each LED is a pixel,...
Product Description:The ws2811 LED strip is a relatively cost-effective pixel addressable product currently, controlled by an external IC WS2811. Usually, each IC controls 3...
Description:SK6812MNI3535 is an intelligent LED product that integrates control circuit and light-emitting circuit. Each LED is a pixel. Each pixel contains MCU intelligent digital...
Description: The SK6812 RGBW LED strip is an individually chromatic LED strip with four color channels - red, green, blue and white (RGBW). Compared...
Description:WS2815 LED strip is an intelligent 3-channel addressable strip product that integrates control circuit and light-emitting circuit. It has built-in IC, each LED is...
Description:WS2813 is an intelligent LED product that integrates control circuit and light-emitting circuit. The appearance of LED is the same as SMD5050. Each LED...
Easton Technology Co., Ltd.'s ws2811 product uses a three-channel controller integrated special circuit, with an MCU digital interface, latch and shaping amplifier circuit inside....
The cookie settings on this website are set to 'allow all cookies' to give you the very best experience. Please click Accept Cookies to continue to use the site.