ws2813 breakpoint transmission pixel digital addressable led strip

Note:
WS2813 must be controlled with a DC5V power supply and LED controller!
There are solder joints every 0.5 meters, please pay attention!
Main features:
One pixel damage will not affect the operation of other LEDs, dual signal line version, signal can jump
PCB color:
White: white PCB; black: black PCB
Protection level:
(1) IP20 --- not waterproof, indoor use
(2) IP65 --- silicone coating, easy to cut, outdoor use
(3) IP67 --- silicone tube, needs to be resealed after cutting, outdoor use
(4) IP68 --- waterproof by glue filling, can work underwater
Product parameters:
(1) Working voltage: DC5V
(2) LED light source: SMD 5050 RGB (same as WS2812 protocol, but uses dual signal lines, so it can be controlled by the same WS2811/ws2812 controller)
(3) LED chip: Jingyuan or Sanan
(4) LED quantity: 30/60/144LED/meter
(5) IC quantity: 30/60/144LED/meter
(6) Power: 9/18//43.2W/m
(7) Grayscale: 256 levels/color
(8) Cuttability: 1 LED/cut (built-in IC, 1 IC controls 1 LED)
(9) Beam angle: 120°
(10) Color modes: 133 patterns and 100 speeds
(11) Dimensions: 5000mm x 10mm x 2.4mm (30leds/M, 60leds/M or 1000mm x 12mm x 2.4mm (144leds/M)
(12) Packing: 5m/roll or 1m/roll 5V ws2813 RGB light strip + 4-pin connector
(13) Warranty: 2-3 years
Features:
(1) Flexible PCB (IP20, IP65) with 3M on the back Tape, easy to install.
(2) Energy saving and environmental protection.
(3) High brightness 5050 SMD LED strip.
(4) Solid state, strong resistance to shock or vibration.
(5) Low power consumption, high light intensity.
(6) Optional RGB controller and power supply system.
(7) Wide viewing angle.
(8) RGB color.

More features:
1. Damage to one pixel will not affect the operation of other LEDs.
2. Dual signal line version, signal can be transmitted in jump mode.
3. Built-in signal shaping circuit, any pixel receives the signal and then outputs it after waveform shaping, ensuring that line waveform distortion will not accumulate.
4. The transmission distance between any two points is within 5 meters, without any additional signal amplification circuit.
5. When the refresh rate is 30 frames/second, the number of cascade points is not less than 1024 points.
6. Data transmission speed is up to 800Kbps. Good light color consistency and high cost performance.

Product Details：

Common applications of WS2813 LED strips:
ws2813 LED strips are widely used in holiday light shows, clothing, game consoles, gaming machines, e-sports equipment, computer cases, TV backgrounds, etc. Clothing, automotive, architectural lighting, sign lighting, cabinet and shelf lighting, as well as decorative lighting for stages, home theaters, wine cellars, cars, bicycles, yachts and cruise ships.
Common controllers for WS2813 LED strips:
ws2813 products can achieve different effects through mini three-button controllers, RF controllers, Bluetooth controllers, music controllers, programmable controllers, WIFI controllers, DMX consoles, Madix, Aduino, Raspberry Pi, ESP8826, ESP32, etc.: static, static changes, water chasing, colorful changes, colorful chasing, animation, etc.