cob led strip

cob LED Strip

Input voltage：DC12V/24V
PCB width:5mm/8mm/10mm
IP:IP20/67/68
LED Type：cob
Product description: Input voltage: DC12V/24V Number of LEDs: 240/312/320/384/480/512/528LEDs/M PCB width: 5mm/8mm/10mm Protection level: IP20/67/68 Warranty: 2-3 years Working temperature: -20°-45° Storage temperature: -30°-65°
INQUIRY

COB LED strip series:


ES-C0B-240	ES-COB-312	ES-COB-320	ES-COB-384	ES-COB-480	ES-COB-512	ES-COB-528
Color: white/red/green/blue/yellow/pink/purple/ice blue
LM/W： CW： 100LM/W NW： 90LM/W WW：80LM/W
240LEDs/M	312LEDs/M	320LEDs/M	384LEDs/M	480LEDs/M	512LEDs/M	528LEDs/M
Color temperature/NM: white light 2200-13000K, red 620-625NM, green 520-525NM, blue 460-470NM, yellow 590-595NM, purple 390-410nm
Ra:Only white light is involved in the problem of Ra, you can choose the color rendering of 80/90/95 three specifications
Power：6W/M	Power：8W/M	Power：8W/M	Power：10W/M	Power：12W/M	Power：14W/M	Power：14W/M
Current/M：12V 0.5A/M 24V：0.25A/M	Current/M：12V 0.67A/M 24V：0.33A/M	Current/M：12V 0.67A/M 24V：0.33A/M	Current/M：12V 0.83A/M 24V：0.42A/M	Current/M：12V 1A/M 24V：0.5A/M	Current/M：12V 1.2A/M 24V：0.6A/M	Current/M：12V 1.2A/M 24V：0.6A/M
PCB Width:8mm	PCB Width：8mm	PCB Width：8mm	PCB Width：5/8/10mm	PCB Width：5/8/10mm	PCB Width：8mm	PCB Width：10mm
IP：IP20 non waterproof/IP67Casing waterproof/IP68 Gule Waterproof
Beam angle：180°
Operating Temperature：-20°-45°
Storage Temperature：-30°-65°
Package：5M/Roll，10M/RollOr customized length
Warranty：2-3 years

Easton Technology Co., Ltd.'s COB led strip products use chips with a color tolerance of less than 5 to ensure the reliability of the chips, and use 2oz or 3oz copper foil on the pcb side, with double-sided lamination to ensure better bending properties and the bonding strength of the conductive lines, the choice of resistance and capacitance, to ensure the consistency and life of the light-emitting color of the light strip and the stability of signal transmission, the product can also use high-quality silicone sleeve IP67 products for outdoor applications to ensure that the product It is not easy to yellow and waterproof; the product can also choose IP68 glue-filled products, using high-quality silicone casing and glue to ensure better waterproof performance of the product.

Easton Technology Co., Ltd.'s COB led light strip products can choose 12V or 24V power supply voltage, and the color rendering index can choose CRI 80 90 95 several specifications

The production process of COB led strip products of Easton Technology Co., Ltd. is:

1.) First coat the PCB pads with solder paste through an automatic solder paste machine. The coating uniformity and thickness of the solder paste determine the quality and flatness of the soldered chips, as well as the quality of the soldered chips; Apply solder paste

2.) Load the PCB board coated with solder paste on the carrier, input and set the die-bonding program of the chip through computer programming, adjust the direction and height of the die-bonding, and confirm the electrode direction of the chip;

3.) Do a small-batch die-bonding test first, and inspect the appearance quality of the solid-bonded PCB to determine the direction of the die-bonding, whether there is solder paste connected, and whether the position of the die-bonding is correct, and the inspected product will flow into the next process. ;

4.) Put the solid crystal PCB board and wafer into reflow soldering, set the temperature and speed of reflow soldering, solder the LED chip firmly in the reflow soldering, and conduct an electrical test after being released to test whether the LED chip emits normally. ;

5.) After testing the LED chip on the PCB board, carry out the powder mixing process of silica gel and phosphor powder, according to the photoelectric parameters such as color temperature and brightness specified by the customer, carry out different proportions of configuration, and carry out positive air defoaming of the prepared glue

6.) Fix the PCB board on the glue dispenser carrier for the glue dispensing process. The glue dispensing process is the most critical process for the success of the light strip. After dispensing, put the PCB board into the oven for baking. The glue from different manufacturers If the baking conditions are inconsistent, you must refer to the manufacturer's requirements for verification before setting the appropriate baking temperature.

7.) After the glue is dispensed, test the photoelectric parameters of the light strip to see if the test data meets the customer's requirements.

8.) After welding the 0.5-meter PCB board, connect it to the requirements ranging from 5-10 meters;

9.) Aging detection

10.) Pack the light strip with a reel after testing the adhesive;

11.) Check again after the reel, put it in an electrostatic bag, and pack it into a box

The differences between COB led strip products and SMT LED strip products of Easton Technology Co., Ltd. are as follows:

characteristic type		COB LED strip	SMD LED strip
similarity		Elongated,LED light source, flexible PCB, can be cut and spliced
differentia	Craftsmanship	cob: is the English abbreviation of Chip on Board, which means on-board chip packaging technology. COB light strips are light strips that encapsulate chips on flexible boards. At present, most of the chips use flip-chip flip-chips, which are firmly arranged in a linear manner. It is bonded on the flexible PCB, and then the colloid is directly wrapped on the surface of the chip	SMD refers to surface mount components. Usually, the SMD light strip we say is to attach a number of independent lamp beads (2216/2110/2835/3528/5730/5050/3014, etc.) to the PCB board.
	glow effect	Due to the continuity of the fluorescent glue coating and the small spacing between the chips, the cob light strip emits a line with soft light, which realizes the feature of seeing the light but not seeing the light.	SMD is composed of a single LED lamp bead, the distance between the lamp beads is large, and the light spot can be seen after lighting
	heat dissipation	The COB light strip is flip-chip directly packaged on the flexible circuit board, the heat is directly transferred to the circuit board, the heat dissipation efficiency is higher, and the light decay is smaller	The SMD light strip uses the chip packaged in the LED bracket shell, and the heat dissipation needs to be transmitted to the circuit board through the bracket, and the heat dissipation path is relatively complicated

Easton Technology Co., Ltd.'s COBled light strip products are widely used in holiday light shows, clothing, game consoles, gaming machines, e-sports equipment, computer cases, TV backgrounds, clothing, automotive, architectural lighting, sign lighting, cabinet and shelf lighting , backlighting and related occasions such as stage, home theater, wine cellar, yacht and cruise ship, etc.