WS2812 LED Strip Specifications

 DOWNLOAD

Product description:

The WS2812 product of Easton Technology Co., Ltd. is a smart led product integrating a control circuit and a light-emitting circuit. The shape of the led is the same as that of the SMD5050. Each led is a pixel, and each pixel contains the MCU intelligent digital interface. Latch and shaping amplifier circuit, etc., to ensure the high consistency of pixel color, through the zero-return code communication method, it can achieve the transmission distance of any two points exceeding 5 meters without the need for signal amplifier circuit, with 256 gray levels, complete Full true color display of 16777216 colors, scanning frequency not less than 400hz/s, serial interface design, data reception and decoding are completed through a signal line
Easton Technology Co., Ltd.'s WS2812 products can achieve different effects through mini three-button controller, RF controller, Bluetooth controller, music controller, programmable controller, online controller, DMX console, Madix, Aduino, etc. : Static, static change, water chase, colorful change, colorful chase, animation, etc.
Easton Technology Co., Ltd.'s WS2812 product can only choose 5V power supply voltage, and the product has passed multiple processes such as raw material inspection-SMT patch-reflow soldering-semi-finished product inspection-splicing-aging inspection-reel-finished product inspection-packaging and so on. Quality control to ensure the quality, the LED with gold wire and copper support large chip is used for the LED to ensure the reliability of the LED, and the 2oz or 3oz copper foil is used for the PCB with double-sided film to ensure better bending. The bonding strength of the conductive circuit and the resistance and capacitance are selected to ensure the consistency and life of the light-emitting color and the stability of the signal transmission. The product can also be made of high-quality silica gel or PU to make IP65 products, and more Easy to clean without yellowing; high-quality silicone sleeve IP67 products can also be used outdoors to ensure that the product is not easy to yellow and waterproof; the product can also choose IP68 potting products, using high-quality silicone sleeves and glue, Ensure better waterproof performance of the product.

Note:
Only Led Strip, Not Included Power Supply or Led Controller!
WS2812 Must Use DC5V Power Supply AND Led Controller to Control!
Every 0.5meter with solder joints, please note!

PCB color:

White: White PCB;  Black: Black PCB

Protection grade:

(1) IP20 --- No waterproof, for indoor use

(2) IP65 --- Silicone coating, easy cut, outdoor use

(3) IP67 --- Silicone tube, need reseal after cut, outdoor use

(4) IP68 --- IP65+IP67, can work underwater ( if you need we can make for you ! )

Product parameter:

(1) Working Voltage: DC5V
(2) LED Source: SMD 5050 RGB
(3) LED Chip: Epistar or San an
(4) LED QTY: 30/60/74/96/100 /144LED/M
(5) IC QTY: 30/60/74/96/100 /144LED/M
(6) Power: 9/18/22/28.8/30/43.2W/M
(7) Grey Scale: 256 / Color
(8) Cutability:1 led / cutting (Built-in IC ws2811 , 1 ic control 1 LED )
(9) Beam Angle: 120 °
(10) Color Mode: 133Pattern & 100 Speeds
(11) Dimension: 5000mm x 10mm x 2.4mm 1000mm x 12mm x 2.4mm
(12) Packaging: 5m /roll  or 1m/ roll 5v ws2812 rgb strip + 3 pin connector
(13) Warranty: 2-3 years

Features:

(1) Flexible PCB  ( IP20,IP65)  With 3M adhesive tape on the back for easy installation.

(2) Energy saving and environment protection.

(3) High brightness 5050 SMD LED light strip.

(4) Solid-state, high shock or vibration resistance.

(5) Low power consumption, high intensity.

(6) Match the RGB controller and power supplier system.

(7) Wide viewing angle.

(8) Available in various single and RGB colors.